Product
W01/N34 Replacement Mechanical Seal for INOXPA Pumps
”
| Seal Reference | W01/N34 |
|---|---|
| Compatible Equipment | Selected INOXPA pumps; confirm the full pump model |
| Seal Type | Replacement pump mechanical seal |
| Size Selection | Match the shaft, stationary seat and installed length to the existing seal |
| Material Selection | Specify the liquid and operating conditions with your inquiry |
| Before Ordering | Send all available W01/N34 markings, part photos and dimensions |
“
Product Details
”
| Product Name | W01/N34 Replacement Mechanical Seal for INOXPA Pumps |
|---|---|
| Model / Reference | W01/N34; confirm the complete reference shown on your seal or parts list |
| Brand / Origin | Hong Teng / China |
| Replacement Scope | Selected INOXPA pump configurations after dimensional confirmation |
| Shaft or Sleeve Fit | Measure the actual shaft or sleeve diameter; retain the measurement units |
| Stationary Seat | Compare seat outside diameter, thickness and mounting profile |
| Assembly Geometry | Confirm the rotating assembly, housing features and installed working length |
| Materials | Confirm face pair, elastomer and metal specification for the liquid and cleaning conditions |
| Supply Contents | Confirm the required rotating parts, seat and secondary seals before quotation |
“
Product Description
”
W01/N34 replacement mechanical seals are offered for selected INOXPA pump repair applications. Use the W01/N34 reference as the starting point, then compare the removed assembly with the supplied replacement drawing or sample.
The reference alone does not specify every mounting dimension or material combination. Send photographs of the complete assembly and separate seat, together with any markings. For this product, concentrate on the seat profile, housing geometry and installed length so that a similar-looking part is not selected by appearance alone.
When the old seal cannot be identified confidently, follow our mechanical seal identification guide. Use the mechanical seal dimensions and working length guide to organize the measurements supplied with your inquiry.
A different INOXPA replacement reference is listed separately as M07 1 inch Replacement Mechanical Seal for INOXPA Pumps. Compare the references only after checking the actual pump; this link is not an interchangeability statement.
Compatibility notice: INOXPA names and references identify the intended replacement application only. This is a Hong Teng aftermarket replacement, not an original INOXPA part; no affiliation or approval by INOXPA is implied.
“
Application
Applications and Selection
For maintenance of selected INOXPA pumps where the W01/N34 assembly matches the installed sealing arrangement. Food, beverage or other processing service requires confirmation of the supplied materials and the application’s hygiene requirements.
W01/N34 Inquiry Checklist
- Full pump model and nameplate photograph.
- Complete W01/N34 marking or the available spare-part reference.
- Front, side and separated-component photographs, including the stationary seat.
- Shaft or sleeve diameter, seat dimensions and installed working length.
- Process liquid, cleaning media if used, temperature, pressure and speed.
W01/N34 Questions
Is a W01 or N34 marking enough to confirm a replacement?
No. Include the complete marking and compare the assembly, stationary seat and installation dimensions before confirming the order.
Can this seal replace every INOXPA pump seal?
No universal fit is claimed. The replacement must match the pump’s actual configuration.
Does the listing guarantee a food-contact material specification?
No. State the required material and documentation requirements so that the quoted configuration can be checked.
Product Photos
Company Profile
Dongguan Hongteng Seals Co., Ltd. Company was established in 1996. The company has passed the GB/T19001-2016 idt ISO9001:2015 quality management system certification. The company has world-renowned pump mechanical seals, axe mechanical seals, fluid mechanical seals, metal bellows mechanical seals, container mechanical seals, rubber bellows mechanical seals, O-ring seals, PTFE mechanical seals, stainless steel oil seals, skeleton oil seals, hydraulic oil seals, automotive water seals and various mechanical seal materials, hard alloys, silicon carbide, carbon graphite, alumina, etc. There are Guangzhou Port, Shenzhen Port, and Foshan Port in the surrounding area, with developed and efficient logistics. The company has a stock warehouse of over 2000 square meters, which can efficiently and quickly deliver goods.
Production of Workshop
Exhibiton
Packing And Shipping
Customer Reviews
frequently asked questions
01. Q: Are you a factory or a trader?
A: We are a production factory and also sell on our own
02. Q: Where is your factory located?
A: Our factory is located in Dongguan City, and the nearest ports are Guangzhou Port and Shenzhen Port. Other ports can also be selected according to customer needs
03. Q: What is your delivery time in days?
A: For products in stock, we can ship immediately when receive the payment; For other projects, we need 10-25 days for mass production
04. Q: Do you provide free samples?
A: We usually do not provide free samples, and the sample fee can be deducted after the second order
05. Question: What is the most commonly used mode of transportation
A: The weight and size of mechanical seals are relatively small, and air freight, sea freight, and express delivery are usually the preferred transportation methods for customers.
06. Q:What payment methods do you accept?
A: For products in stock, 100% advance payment is required and immediate shipment will be made upon receipt of payment. For customized products, a 30% advance payment and a 70% payment must be made before the order is shipped. We accept T/T, Western Union, and also welcome customers to make payments through Alibaba
07. Q: Can you provide me with customized production
A: Yes, we can customize products and welcome OEM
