Product
4OM-60 Replacement Cartridge Mechanical Seal for KSB Pumps
| Product Reference | 4OM-60 |
|---|---|
| Supplier / Brand | Hong Teng |
| Place of Origin | China |
| Compatible Equipment | Selected KSB pumps; confirm the complete pump model |
| Product Type | Aftermarket replacement cartridge mechanical seal |
| Application | Pump maintenance, repair and seal replacement |
| Size Confirmation | Match measured dimensions and the installation drawing |
| Enquiry Information | Pump nameplate, seal reference, photos and working medium |
Product Details
| Product Name | 4OM-60 Replacement Cartridge Mechanical Seal for KSB Pumps |
|---|---|
| Model Identification | 4OM-60; retain the complete reference when enquiring |
| Pump Identification | Full KSB model and any available serial or spare-part reference |
| Assembly Comparison | Compare the metal body, face-end arrangement and separate ring profiles shown in the product photos |
| Dimensions to Supply | Shaft or sleeve diameter, body outside diameter, seat dimensions and working length |
| Installation Position | Confirm from the actual pump and its installation drawing |
| Materials | Confirm the required seal-face and elastomer combination for the working medium |
| Operating Conditions | State fluid, temperature, pressure and speed for configuration review |
| Supply Scope | Confirm the included assembly, rings and any ancillary parts in the quotation |
| Reference Check | Do not substitute 4OM-110 solely because it belongs to the same reference family |
Product Description
The 4OM-60 replacement cartridge mechanical seal is supplied by Hong Teng for selected KSB pump repair and maintenance requirements. Selection should start with the complete pump identity and the reference on the existing seal, rather than a visual resemblance alone.
The product photographs show the metal assembly from several directions and separate ring profiles. For an enquiry, include comparable views of your removed parts together with the shaft or sleeve diameter, seat dimensions and installed working length. Confirm which components are required as part of the replacement set.
Use our How to Identify the Correct Mechanical Seal for a Pump guide to organise the matching information, or browse the cartridge mechanical seal range for other reference types.
The 4OM-110 Replacement Cartridge Mechanical Seal for KSB Pumps is listed separately. Do not select it as a substitute for 4OM-60 without confirmation of the actual pump and seal configuration.
KSB is a trademark of its respective owner. This is a Hong Teng aftermarket replacement product, not an original KSB part. Brand and model references identify applications only.
Application
Applications and Matching
For maintenance and replacement work on selected KSB pumps where the removed seal and installation drawing have been matched to the 4OM-60 reference. Suitability for the pumped fluid and operating conditions must also be confirmed.
Information to Send with a 4OM-60 Enquiry
- Full pump model, nameplate photo and any existing seal or spare-part reference.
- Face-end, rear and side views of the metal assembly, plus clear photos of the separate rings.
- Shaft or sleeve diameter, ring dimensions and the required working length or installation drawing.
- Working medium, temperature, pressure, speed, required quantity and parts to be included.
Questions About This Reference
Does the 4OM-60 reference alone confirm the shaft size?
Use the measured diameter and a matching drawing to confirm the required size. This page does not assign a shaft diameter from the model suffix alone.
Should I include the separate rings in my matching photos?
Yes. Send all removed sealing components and confirm the required supply scope, rather than identifying the metal body alone.
Which installation instructions should I use?
Follow the instructions for the confirmed pump and seal configuration. Our Cartridge Mechanical Seal Installation: Step-by-Step Guide and Common Mistakes is a general guide, not a replacement for the equipment-specific drawing.
Product Photos
Compare the assembly and ring profiles shown below with the removed seal. Photographs do not replace a dimensioned drawing.
Company Profile
Dongguan Hongteng Seals Co., Ltd. Company was established in 1996. The company has passed the GB/T19001-2016 idt ISO9001:2015 quality management system certification. The company has world-renowned pump mechanical seals, axe mechanical seals, fluid mechanical seals, metal bellows mechanical seals, container mechanical seals, rubber bellows mechanical seals, O-ring seals, PTFE mechanical seals, stainless steel oil seals, skeleton oil seals, hydraulic oil seals, automotive water seals and various mechanical seal materials, hard alloys, silicon carbide, carbon graphite, alumina, etc. There are Guangzhou Port, Shenzhen Port, and Foshan Port in the surrounding area, with developed and efficient logistics. The company has a stock warehouse of over 2000 square meters, which can efficiently and quickly deliver goods.
Production of Workshop
Exhibiton
Packing And Shipping
Customer Reviews
frequently asked questions
01. Q: Are you a factory or a trader?
A: We are a production factory and also sell on our own
02. Q: Where is your factory located?
A: Our factory is located in Dongguan City, and the nearest ports are Guangzhou Port and Shenzhen Port. Other ports can also be selected according to customer needs
03. Q: What is your delivery time in days?
A: For products in stock, we can ship immediately when receive the payment; For other projects, we need 10-25 days for mass production
04. Q: Do you provide free samples?
A: We usually do not provide free samples, and the sample fee can be deducted after the second order
05. Question: What is the most commonly used mode of transportation
A: The weight and size of mechanical seals are relatively small, and air freight, sea freight, and express delivery are usually the preferred transportation methods for customers.
06. Q:What payment methods do you accept?
A: For products in stock, 100% advance payment is required and immediate shipment will be made upon receipt of payment. For customized products, a 30% advance payment and a 70% payment must be made before the order is shipped. We accept T/T, Western Union, and also welcome customers to make payments through Alibaba
07. Q: Can you provide me with customized production
A: Yes, we can customize products and welcome OEM
