Product
4OM-110 Replacement Cartridge Mechanical Seal for KSB Pumps
| Product Reference | 4OM-110 |
|---|---|
| Supplier / Brand | Hong Teng |
| Place of Origin | China |
| Compatible Equipment | Selected KSB pump configurations |
| Product Type | Aftermarket replacement cartridge mechanical seal |
| Application | Replacement during pump servicing or overhaul |
| Installation Check | Confirm the complete assembly, mounting fit and working length |
| Enquiry Information | Full pump model, assembly photos, drawing and service conditions |
Product Details
| Product Name | 4OM-110 Replacement Cartridge Mechanical Seal for KSB Pumps |
|---|---|
| Model Identification | 4OM-110; quote the reference in full |
| Equipment Match | Compare the complete KSB pump model with the removed assembly |
| Visible Features to Compare | Body steps, central bore, outer profile and the face-end ring arrangement |
| Mounting Information | Provide the installation drawing and measured mating dimensions |
| Dimensions to Supply | Shaft or sleeve diameter, body diameters, ring dimensions and available axial space |
| Seal Position | Confirm the fitted position and working length from the pump drawing |
| Material Selection | Specify the working medium and required materials for technical confirmation |
| Service Data | Provide operating temperature, pressure and speed; ratings are configuration-specific |
| Parts Included | Agree the complete supply list before ordering; photos are identification references |
Product Description
The 4OM-110 replacement cartridge mechanical seal is intended for matching to selected KSB pump assemblies. Keep the full 4OM-110 reference on your enquiry and provide the pump nameplate and the existing seal arrangement so that the replacement can be reviewed against the equipment.
When comparing the illustrated unit, record the stepped body profile, central bore, face-end arrangement and mating ring dimensions. Include the available axial space and installation drawing where possible. A match in one diameter does not establish that the complete assembly will fit.
For a drawing or photo-based enquiry, follow How to Identify the Correct Mechanical Seal for a Pump. Other assembly types can be viewed in our cartridge mechanical seal range.
A separate listing is available for the 4OM-60 Replacement Cartridge Mechanical Seal for KSB Pumps. The two references are not presented as interchangeable; confirm the required parts and configuration before placing an order.
This aftermarket replacement is supplied by Hong Teng. KSB names and references describe the intended application and do not imply original manufacture or affiliation.
Application
Replacement Scope
For servicing selected KSB pumps after the 4OM-110 assembly has been checked against the existing seal and its mounting arrangement. Confirm both the physical fit and material suitability before use.
4OM-110 Confirmation Checklist
- Record the complete pump identity and existing seal reference, including any suffix or revision.
- Photograph the face end, rear opening, stepped body and any separate ring supplied or removed with the assembly.
- Provide a drawing or measurements of the shaft or sleeve, mating bores, ring profiles and axial installation space.
- State the fluid, operating conditions, requested quantity and whether a complete set or specific parts are required.
Questions Before Ordering
Can this page be used as a 110 mm dimensional specification?
No. 4OM-110 is the listed product reference; the actual dimensions must be confirmed against the pump and approved drawing.
Can the appearance confirm materials or pressure capability?
No. Specify the required seal-face and elastomer combination and service conditions when requesting a quotation.
Can 4OM-110 replace another 4OM reference directly?
Do not assume this from the family name. Compare the complete installation and obtain confirmation of the selected assembly.
For general preparation advice, see Cartridge Mechanical Seal Installation: Step-by-Step Guide and Common Mistakes. Use the confirmed equipment-specific instructions for installation.
Product Photos
Compare the assembly and ring profiles shown below with the removed seal. Photographs do not replace a dimensioned drawing.
Company Profile
Dongguan Hongteng Seals Co., Ltd. Company was established in 1996. The company has passed the GB/T19001-2016 idt ISO9001:2015 quality management system certification. The company has world-renowned pump mechanical seals, axe mechanical seals, fluid mechanical seals, metal bellows mechanical seals, container mechanical seals, rubber bellows mechanical seals, O-ring seals, PTFE mechanical seals, stainless steel oil seals, skeleton oil seals, hydraulic oil seals, automotive water seals and various mechanical seal materials, hard alloys, silicon carbide, carbon graphite, alumina, etc. There are Guangzhou Port, Shenzhen Port, and Foshan Port in the surrounding area, with developed and efficient logistics. The company has a stock warehouse of over 2000 square meters, which can efficiently and quickly deliver goods.
Production of Workshop
Exhibiton
Packing And Shipping
Customer Reviews
frequently asked questions
01. Q: Are you a factory or a trader?
A: We are a production factory and also sell on our own
02. Q: Where is your factory located?
A: Our factory is located in Dongguan City, and the nearest ports are Guangzhou Port and Shenzhen Port. Other ports can also be selected according to customer needs
03. Q: What is your delivery time in days?
A: For products in stock, we can ship immediately when receive the payment; For other projects, we need 10-25 days for mass production
04. Q: Do you provide free samples?
A: We usually do not provide free samples, and the sample fee can be deducted after the second order
05. Question: What is the most commonly used mode of transportation
A: The weight and size of mechanical seals are relatively small, and air freight, sea freight, and express delivery are usually the preferred transportation methods for customers.
06. Q:What payment methods do you accept?
A: For products in stock, 100% advance payment is required and immediate shipment will be made upon receipt of payment. For customized products, a 30% advance payment and a 70% payment must be made before the order is shipped. We accept T/T, Western Union, and also welcome customers to make payments through Alibaba
07. Q: Can you provide me with customized production
A: Yes, we can customize products and welcome OEM
